Tripp-Lite UPB-10K0-1U1CQ Manuel De L'utilisateur page 4

Power Bank Charging Instructions
Notes:
• Before charging any devices, first fully charge the wireless power bank.
• When charging the power bank, the LEDs will illuminate to indicate the
battery capacity level (see table below):
LED Status
●●●●○
●●● ○
●● ○○
● ○○○
○○○○
● = LED Illuminated
○ = LED Off
= LED Flashing
1. Using the included USB 2.0 Type-C to Type-A cable, connect
the USB-C port on the power bank to an appropriate USB-A
port on your computer or USB wall charger.
2. The power bank will begin charging, with the LEDs operating per
the above notes and table.
Note: The Smart LED (the 5th LED on the power bank) will illuminate solid
red, indicating wireless charging is available. If a compatible wireless device
is placed on the charger, the Smart LED will blink blue.
Power Bank Battery Capacity
100%
75% - 99%
50% -74%
25%-49%
1% - 24%
4