JVC KW-ADV794 Manuel D'instructions page 68

Symptom
"CALL 1-888-539-SIRIUS TO SUBSCRIBE"
appears on the screen.
"Acquiring Signal" or "NO SIGNAL" appears
on the screen.
"No Antenna" or "CHECK ANTENNA" appears
on the screen.
"Invalid channel" appears on the screen
for about 5 seconds, then returns to the
previous display when listening to the
SIRIUS Satellite radio.
"CH–––" or "CHANNEL UNAVL" appears on
the screen for about 2 seconds, then returns
to the previous channel while listening to
the XM Satellite radio.
No information appears on the screen.
"UPDATING" or "UNAUTH" appears on the
screen and no sound can be heard.
"OFF AIR" appears on the screen while
listening to the XM Satellite radio.
"LOADING" appears on the screen while
listening to the XM Satellite radio.
"Reset08" appears on the screen.
Satellite radio does not work at all.
• Sound quality changes when receiving HD
Radio stations.
• No sound can be heard.
• "Reset08" appears on the screen.
Remedy/Cause
SIRIUS Satellite Radio is connected but does not have an
active subscription. For information on how to subscribe,
☞ page 31.
Make sure your Satellite Radio antenna is mounted outside
the vehicle. Move vehicle to an area with a clear view of
the sky.
Check your satellite radio antenna connection and be sure
it is firmly attached.
No broadcast on the selected channel.
Select another channel or continue listening to the
previous channel.
Selected channel is no longer available or is unauthorized.
Select another channel or continue listening to the
previous channel.
No text information for the selected channel.
The receiver is updating the channel information and
it takes a few minutes to complete.
Selected channel is not broadcasting at this time. Select
another channel or continue listening to the previous
channel.
The unit is loading the channel information and audio. Text
information is temporarily unavailable.
Reconnect this unit and the Satellite radio correctly and
reset the unit.
Reconnect the Satellite radio after a few seconds.
Fix the reception mode either to <DIGITAL> or
<ANALOG>. ( ☞ page 35)
• <ANALOG> is selected when receiving all digital
broadcast of HD Radio station. Select <DIGITAL> or
<AUTO>. ( ☞ page 35)
• <DIGITAL> is selected when receiving weak digital
signals or receiving conventional radio broadcast. Select
<ANALOG> or <AUTO>. ( ☞ page 35)
Reconnect this unit and the HD Radio tuner box correctly,
then reset the unit.
68