Before you begin
• Read all instructions before set up.
• Select a level site clear of rocks, branches, and other hard or
sharp objects, to install your tent.
WARNING: Keep clear of overhead power lines.
• Do not set up your tent under trees because of potential
lightning strikes or falling tree limbs in inclement weather.
• Secure with all stakes and guylines provided to prevent
property damage or personal injury.
• For best results in windy conditions, position narrow end of
tent into the wind.
• Enlist the help of at least one other person to assist you
when it is time to assemble the tent.
Pole Descriptions
No.
Description
1
Main Body Pole, thick
2
Awning Pole, thin, long
3
Vent Pole, thin, short
1
Layout & Positioning
of Tent and Poles
• Layout and position the tent with door facing desired
direction. (Fig. 1)
• Stake down tent corners first through the stake rings. (Fig. 2)
• Keep the floor taut.
• Assemble all poles by unfolding and interlocking the shock-
corded pole sections.
• Insert the body poles into the pole sleeves.
Pole
Sleeve
Tent
Stake
Fig. 2
TENT SETUP INSTRUCTIONS
Qty.
Pole
Pole
Repair Kit
Replacement Kit
2
5010000569
5010000568
1
5010000543
5010000545
1
5010000543
5010000545
Fig. 1
Stake Ring
2
Connect Poles to Tent
• Insert one pin into one end of the pole. (Fig. 3 and 4)
• Go to opposite end of pole and carefully insert the pin into
the other pole end. (Fig. 4)
• Repeat for all poles.
Pole
Pin
3
Attach Rainfly
• Insert the tips of the vent pole into the pockets on underside of
1
rainfly. (Fig. 5 & 6)
• Insert awning pole into pole sleeve located on underside of
rainfly. (Fig. 5 )
• Drape rainfly over tent. (Fig. 7)
• Insert tips of awning pole into the grommets. (Fig. 8)
• Connect the elastic loops with "S" hooks, (found at the rainfly
corners) to the rings found at the tent corners. (Fig. 9)
• Secure rainfly with straps located on the underside of
rainfly. (Fig. 10)
• Attach and stake out guylines. (Fig. 11)
HINT: During setup, keep door zipped to keep proper tension
on fabric.
MODEL 2000012991
Grommets
Fig. 3
Fig. 4
(continued on other side)