Publicité
Les langues disponibles
Les langues disponibles
Liens rapides
DO NOT PRINT THIS PAGE
Material: White washable and tear resistant non-woven
fabric, such as Tyvek.
Ink: Black
Resolution: 150 DPI or above
Printing method: Offset Printing
Size: 8.27 x 11.69 (A4) in (W x H)
This drawing contains proprietary information and trade secrets of The Coleman Company, Inc.
METRIC
[INCH]
CRITICAL DIMENSION
CHECKING IS COMPULSORY
01
VOLUME
22-NOV-12
cm3
MASS
grams
REV.
DATE
MATERIAL:
SEE NOTES
DENSITY
g/cm3
GENERAL TOLERANCES
EXCEPT AS NOTED
SEE NOTES
FINISH
SPEC.:
0 TO
6mm = ±0.1
>6 TO
30mm = ±0.2
SCALE:
DATE:
>30 TO
80mm = ±0.3
1:1
>80 TO
180mm = ±0.4
>180mm
= ±0.5
NAME:
Instruction Sheet for 2000012991 Rosewood™ 3P Dome
ANGULAR
= ± 3°
Printing Notes:
Unauthorized use or copying is prohibited.
NEW
MODIFICATIONS
DRAWN BY:
22-NOV-12
Rainy X
Program: InDesign CS4
Black
Rainy X
20025390
NAME
ECN NO.
The Coleman Company, Inc.
Wichita, Kansas USA 67219
COMPOSITE- NO
SHEET 1 OF 1
APPROVED BY:
REVISION
01
ID
PART
4010022882
NO.:
Publicité
Manuels Connexes pour Coleman 2000012991
Sommaire des Matières pour Coleman 2000012991
- Page 1 Ink: Black Resolution: 150 DPI or above Printing method: Offset Printing Size: 8.27 x 11.69 (A4) in (W x H) This drawing contains proprietary information and trade secrets of The Coleman Company, Inc. Unauthorized use or copying is prohibited. METRIC [INCH]...
- Page 2 TENT SETUP INSTRUCTIONS MODEL 2000012991 Connect Poles to Tent Before you begin • Read all instructions before set up. • Select a level site clear of rocks, branches, and other hard or sharp objects, to install your tent. • Insert one pin into one end of the pole. (Fig. 3 and 4) WARNING: Keep clear of overhead power lines.
- Page 3 IN PROPERTY DAMAGE OR PERSONAL INJURY. MADE IN BANGLADESH • Tent poles should not be left telescoped together during storage. © 2012 The Coleman Company, Inc. All rights reserved. • Do not leave your tent set-up for weeks at a time. Be aware that Coleman , and are registered trademarks of The Coleman Company, Inc.
-
Page 4: Accrochage Des Mâts À La Tente
INSTRUCTIONS DE MONTAGE DE LA TENTE MODÈLE 2000012991 Accrochage des mâts Avant de commencer • Lisez toutes les instructions avant d’entreprendre le montage. à la tente • Choisissez l’emplacement où vous monterez votre tente: plat, sans pierres, branches ou autres objets pointus. - Page 5 • Tirez sur les piquets pour les déterrer. NE TIREZ SURTOUT JAMAIS 1-800-387-6161 au Canada • www.coleman.com SUR LA TOILE POUR DÉTERRER LES PIQUETS – VOUS POURRIEZ FABRIQUÉE AU BANGLADESH CAUSER DOMMAGES MATÉRIELS ET BLESSURES CORPORELLES. © 2012 The Coleman Company, Inc. Tous droits réservés. Coleman , et sont des marques déposées de The Coleman Company, Inc. • Ne rangez pas la tente avec ses mâts emboîtés, déboîtez-les.