Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. Attach the assembled Storage Compartment (G) parts to the wheels/legs
assembly. Push Storage Compartment (G) down until it is fit into place.
Assembly of Main Unit
Stainless Steel Kettle
•
Place Main Unit (A) onto the top of the Storage Compartment (B).
•
Ensure that the two inserting pins underneath the Main Unit (A) line up correctly so that
Main Unit (A) can be locked under the beam of the Storage Compartment (C) (see figure 1).
•
Place the kettle into the support brackets and connect the power cord at the
base. Insert the crank handle and turn counter-clockwise to attach.
ON / OFF / LIGHT Switch
Crank Handle
10
Publicité
Table des Matières
