Salamander Designs FPS1XL Mode D'emploi page 6

INSTALL LEGS
Install legs by having one person hold leg and other person fasten with "I"
screws.
Please note that the leg has a long side and short side - the long side with
caster brake faces the front of the unit.
L
I x 10
After legs have been securely fastened to stand, use two-people lift stand
to upright position.
There are 6 "I" screws per leg. The fifth screw is installed on the top
of the leg as shown above.
Salamander Designs - XL Electric Lift, Mobile Display Stands www,salamandercommercial.com 501-680 [02.21] page 6 of 24