Package Contents And Assembly - VR46 MOTOR BIKE-X Manuel D'utilisation

Model Reference picture
Motorbike-X

2. Package contents and assembly

In the package
- n.1 handlebar plate
- n.4 handlebar plate screws
- n.2 footrests
- n.4 plastic covers
- n.3 Allen wrenches
- n.2 fixed wrenches
- n.4 footrest fixing screws
- n.2 cover fixing screws
- n.1 battery charger
07
Indications
1. Front wheel:
Quick release lever
Install the wheel on the front fork
according to the direction of the
arrow. After installing the front wheel,
turn the quick release lever clockwise
as much as required and then bend it
inwards to lock it.
2. Handlebar:
As shown in the figure, use the Allen
wrench to tighten the handlebar
attachment plate using the four
screws and the washers and respect
the tightening torque of 9Nm.
3. Footrests:
Place the footrest, with the stand
included, against the left side,
aligning it with the respective holes on
the frame, insert the two screws and
tighten them (see picture).
Place the footrest against the
opposite side, aligning it with the
respective holes on the frame, insert
the two screws and tighten them
(see picture).