R82 Gazelle PS Mode D'emploi page 16

16
Adjusting the gas spring
Gazelle PS is equipped with a gas spring for
angle adjustment. After a while it might need
adjustment. The adjustment is necessary when:
The gas spring is releasing itself
EN
The gas spring can not be released
If the gas spring releases itself, loosen the nut
(B) with and 17 mm wrench. Turn the bar (A) anti-
clock-wise to loosen. Tighten the nut (B) again.
A
If the gas spring will not release, loosen the nut
(B) with a 17 mm wrench. Turn the bar (A) clock-
wise to tighten. Tighten the nut (B) again.
B
support.R82.org