Greenlee PDMM-20 Manuel D'instructions page 6

Important Safety Information
Electric shock hazard:
• Unless measuring voltage, shut off and lock out power.
Make sure that all capacitors are discharged. Voltage must
not be present.
• Using this unit near equipment that generates electro-
magnetic interference can result in unstable or inaccurate
readings.
Failure to observe these warnings could result in severe injury
or death.
Electric shock hazard:
• Do not change the measurement function while the test
leads are connected to a component or circuit.
• Do not use the meter to measure voltages in circuits that
could be damaged by the Auto V•Ω mode's low input
impedance (approximately 160 kΩ).
• Do not attempt to repair this unit. It contains no user-ser-
viceable parts.
• Do not expose the unit to extremes in temperature or high
humidity. Refer to "Specifications."
Failure to observe these precautions may result in injury and
can damage the unit.
NOTE: The test leads of this unit are not removable. Do not
attempt to remove them.
6