iRoom iO iTop Light Manuel page 10

Lock
Pull the steel bar out, turn the lug forward and move the steel bar
back until the lug secures the iPad.
intelligence. on.
1
2
3
TouchCode Functionality
1
For activating the iPad lock.
Changing TouchCode PIN
2
Enter desired 4-digit PIN and confirm by pressing the green
button.
Time delay for Automatic Lock
3
Once the lock is released, it automatically relocks after a set
time.
Unlock
Press and hold any two buttons on the iTop faceplate (Quick Keys)
at the same time until the green button starts blinking. Enter the
4-digit PIN (you've set before – see above) and confirm by pressing
the green button. The red button starts blinking. This indicates that
the lock is released now. After a defined time, it relocks itself auto-
matically. By pressing the red button, you can relock manually.
• In case you entered the wrong PIN, you will hear a double beep.
Start over and enter the correct PIN.
• In case you notice any mistyping while entering the code, you
can start over by pressing the red button.
Page 10