App Setup; Date Time Set - ND tackle SMART BITE ALARM N1 SET Mode D'emploi

Note: The range test function tests the range of the remote control. There is a di erence if the
receiver sends signals to bite alarms or if the bite alarm sending signal to the receiver. Use the
range test function to test the range of the unique remote control mode. While you must test the
range of the bite alarm to the receiver manually.

DATE TIME SET

1.Hold press 'Multi-function button' to enter into system menu of S9r(receiver)
2.Choose menu 'Date time set'
3. Left/Right to choose Year/Month/Date/Hour/Minute/Exit, Up/down to set the value
Year Month Date
Hour Minute Exit
UK
11

APP SETUP

1.Hold press 'Multi-function button' to enter into system menu of S9r(receiver)
2.Choose menu 'APP set'
APP set
3. Scroll Up/down to ON/OFF App status. When turned on, the APP icon will be
displayed on the screen.
APP Status
4.Click the 'start' Button on the APP, They will connect automatically.
Note: Remember that you need to turn on Bluetooth on your Smartphone.
Shortcut key for APP set
PRESS
Hold press 'Multi-function button' 11 seconds,
The icon of APP will flicker on the screen.
Most Smartphones will connect without the need of a PIN-Code automatically.
If your phone requires a PIN, type in 000000 to try.
UK
RED 00
MM
Back
12