Sauder Credenza 415979 Instructions De Montage page 15

Step 11
Fasten the END MOLDINGS (R and V) to the ENDS (A
å
and B). Tighten four HIDDEN CAMS.
NOTE: Be sure the WOOD DOWELS in the END
å
MOLDINGS insert into the holes in the ENDS.
These surfaces must be even.
V
The end of the MOLDING
must be against the
FRONT MOLDING (L).
www.sauder.com/service
A
L
Maximum
210 degrees
Minimum
190 degrees
R
These surfaces must be even.
415979
Arrow
B
Page 15