Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
9. Mounting instructions (wall & island)
Mounting on extractor hood
The chimney extractor hood must be installed according to the guidelines for
recirculation – for this, see the manual for your extractor hood.
Mounting on the motor housing
Mount the PlasmaMade Airfilter carefully and level on the motor housing using the
eccentric mounting adapter. Use the ø 2.9 x 19 mm screws to mount the eccentric
mounting adaptor on the motor housing and to clamp the PlasmaMade Airfilter. Put the
mains adapter into the PlasmaMade Airfilter (on the top) and plug into the socket.
After activating the extractor hood motor the filter starts to operate automatically.
22
Publicité
Table des Matières
