RODCRAFT MGN-2 Manuel page 7

• Only use hydraulic oil (Type HLP ISO VG 22) that has been approved by the manufacturer. Caution: Never use brake fluid.
• Maintenance and repair of the equipment must only be performed by qualified technical staff.
7. Air in the hydraulic system
There may be an air accumulation in the hydraulic system which may affect the performance of the Bottle jack. To tackle this kind of problem please proceed
as follows.
1. Open the discharge valve by turning the lever rod anticlockwise whilst simultaneously pumping with the lever (5-6 times).
2. Afterwards, pump the jack up to its maximal height before lowering it again. The hydraulic system is purged.
8. Disposal
The disposal of this equipment must be in accordance with the legislation the respective country.
All damaged, strongly worn out or improperly functioning devices HAVE TO BE TAKEN OUT OF OPERATION.
The repair of the equipment should be performed only by qualified technical staff.
Use the equipment only for its intended use as described above, any other use is explicitly excluded! For injuries and damages resulting from
improper use, misuse or infringement of safety instructions, we accept no liability or warranty.
9. CE Certification
Valid for:
MGN-2/MGN-3/MGN-5/MGN-8/MGN-12/MGN-20/MGN-30/
MGN12F/MGN12L/MGN20F/MGN50L
Origin of the product: Made in China
is in conformity with the requirements of the council Directives on the approximation of the laws of the Member States relating :
to „Machinery": 2006/42/EC (17/05/2006)
applicable harmonised standard(s) :
CP
Technical File
ZAC de la Lorie -38, rue Bobby Sands, B.P10273
available at the
44818 Saint-Herblain Cedex, France
EU Technocenter
Rodcraft Customer Center
Company name
Langemarckstr.35 bis
and address:
45141 Essen- Germany
We hereby declare that the following described machine complies with the general safety and health requirements of below mentioned EU directives due to its design and
conception and the type circulated by ourselves. This declaration becomes invalid if the machine is modified without our approval.
EC DECLARATION
EN 1494:2000 + A1:2008
Visit our Internet presence at www.rodcraft.com
Here you can also download our manuals.
With further questions contact your nearest Rodcraft branch or the authorized dealer.
RODCRAFT PNEUMATIC TOOLS
EN
Serial: 00001 to 99999
Place and date of
issue:
Nicolas Lebreton
R&D Manager:
44818 Saint-Herblain,
France
21/06/2013
7