Memory Card - WOXTER X200 Pro Mode D'emploi

28
User manual Woxter X200 Pro
Copy the document to storage card
» Connect Woxter X200 Pro and computer together with USB cable.
» After setting according to storage of Woxter X200 Pro, connect with
computer successfully.
» Open your computer, in my computer; examine content in "removable
disk (x)".
» Find the document you want to copy, copy it to "removable disk(x)".
» After completion of copying, click "safely remove hardware" in taskbar
of your computer to unload.
Content of Woxter X200 Pro storage device
» NAND FLASH storage device, space for Woxter X200 Pro to store docu-
ment itself.
» TF removable memory card.
» The two above-mentioned storage devices both can be visited through
connection with your computer with USB.
Attention: when your Woxter X200 Pro is connected with USB cable, if you
start up USB storage device, you will cannot visit the memory card through
Tablet, if you want to visit memory card in Woxter X200 Pro, only disconnect
USB cable.

3.7 Memory card

Copy the document to storage card
You can transmit document between Woxter X200 Pro and computer,
such as music and picture, etc. If you want to see documents in Woxter
X200 Pro, only click the file browser to look through content in the SD card.
Delete documents on the storage card of Woxter X200 Pro
» Find document you want to delete.
» Press the document name you need to delete; a file menu will pop up.
» Click delete.
Removing storage card when the Woxter X200 Pro is in starting up state
If need to remove storage card under starting up state of Woxter X200
Pro, you must unload the storage card firstly for fear of failure or damage
of the storage card.
» In the homepage interface, press the menu key, and then click setting.
» Pull the setting menu downwards, and then click storage.
» Click SD card setting.
Figure 3-4
>> woxter.es