Mounting The Limit Switch Brackets - Vimar Elvox ESM2 Manuel Installateur

ESM2, ESM2.120, ESM2.D, ESM2.D.120, ESM2.W, ESM2.W.120, ESM2.1000.W, ESM2.1000.W120
Start securing the first metre of rack, moving the gate manually towards the opening, checking that it rests properly with the pinion of the actuator.
Move the second element of the rack near to the previous one, using a piece of rack to align the teeth of the 2 elements correctly (see figure 10).
Use the screws to secure the second element of the rack and repeat the procedure all along the gate.

8 - Mounting the limit switch brackets

Manually unlock the gear motor, move the gate to the point where it is completely open, secure the bracket of the limit switch Sx so that the magnet
matches the sensor, move the gate to the point where it is completely closed, and secure the bracket of the limit switch Dx so that the magnet matches the
sensor (see Figures 11-13).
EN
Fig. 10
Fig. 11
13