Preliminary Checks; Lubrification - Daspi MAX 600 Manuel D'instructions

G
ENERAL SAFETY RULES
Our compliments for your excellent choice.Your new electromechanical
barrier has been produced according to a high quality and strict
reliability, that's why it will assure you long-lasting performance. This
booklet will offer you all the pieces of information you may need to install
your barrier and to safe guard your safety.
All our products have been made in conformity with the
regulations in force. We recommend using original part only,
during the installation and the upkeep. However, the caution is
unquestionably indispensable and nothing is better than
preventing accidents.
I
MPORTANT
Any installation or repair, or adjustment of the working machinery
by unqualified people is strictly prohibited unless all the
necessary precautions: power supply disconnected (included
possible batteries). All moving mechanism must be provided with
suitable protections.
DASPI is not responsible for any possible damages or injuries to
people, object or animals, caused by any use not provided for this
booklet and/or any unauthorized modification of the product.
Keep scrupulously this booklet enclosing it with technical brochure of
installation in a suitable place well-know by all the interested people.
You have to operate the elimination of the packing material (cardboard,
plastic, polystyrene, etc.) in conformity with the regulations in force,
remembering that for a child a plastic envelope could be extremely
dangerous. You have to teach the people employed in using the
automation about the control and security systems of the installation.
Don't install this product in explosive places.
S M
ECURITY ECHANISM
IN MOUVEMENT
DISTANCE
PRODUCT
The gear motor MAX has been planned and built in
order to opening sliding gates with a weight from 400
kg - 600 kg to 800 kg, in conformity with the version
verifiable on the box or on the registration number.
DASPI is not responsible for any anomalous and
different use of the gear motor MAX.
IMPORTANT: The gear motor MAX is not
provided with mechanical clutch and must be
installed with its DASPI control panel or with a
control panel provided with electronic clutch.
USE OF THE AUTOMATION
Important safety instructions. Warning: it is vital
for the safety of persons to follow all instructions.
Save this instruction. Do not allow children to
play with remote controls or fixed controls. Keep
remote control away from children.
As the automation can be controlled from the
distance through a remote control, you must
always check the full efficiency of all the safety
devices. We recommend inspecting periodically
(every 6 Month) by qualified people the adjustment
of the electronic clutch. If you need to calibrate the
protection consult the paragraph "Adjustment of
the electronical clutch" in the instruction booklet of
the electronic central unit.
All manuals and user guides at all-guides.com
ENGLISH
U
For any kind of upkeep, you have always to cut off the power supply.
For a correct upkeep of the installation where you have installed the
gear motor MAX follow carefully these instructions:
Clean periodically the photocells.
Checking by qualified people the electronic clutch (see the paragraph
"installation of the electronic central unit").
Lubrificate periodically the guide and the wheel of the gate.
In case of malfunction going and seeing qualified people.
D
You have to operate the elimination of the materials in conformity with
the regulations in force. All material must be divided by type (copper,
aluminium, plastic, electrical central unit). However there are not
material considered dangerous for the handler.
D
In order to dismantle or to move away the automation, follow these
instructions:
Cut off the power supply and disconnect the electrical installation.
Dismantle the control console and all the other components of the
installation.
If you have noticed that some components have been damaged, you
have to replace them.
D E
O NOT INSTALL THE LECTRIC SHOCK
AUTOMATION IN PLACE FULL
OF EXPLOSIVE MOISTURES

PRELIMINARY CHECKS

• Read carefully the instruction.
• Check that the product has not been damage
• Check that the gate structure is strong and that
• Check that your product is adequate to the
• Check that the electrical installation is in
• Check that there is a suitable ground safety
• Check that the manual manoeuvre always is
• Remember that the automation makes easy the

LUBRIFICATION

The gear motor MAX is provided with permanent
lubrification
PKEEP
EMOLITION
ISMANTLING
U U
SE
FOR WELDING
THE GLOVES
during the transport.
during its movement there aren't friction points.
weight of the gate.
accordance with the characteristic required by
the gear motor.
system and that the metallic parts of the
installation is connected.
easily practicable.
use of the gate but don't resolve the problems
due to a defective installation or to a faulty of
upkeep.
K
SE GLASSES EEP THE PROTECTION
CARTER