Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
4
4
5
5
Turn the vehicle body downside up. Remove all the parts from the front axle.
1. Slide a Ø10 washer onto the front axle.
2. Slide a front wheel onto the front alxe.
3. Slide a Ø10 washer onto the front axle.
4. Insert the split pin into the hole in the end of the front axle. Bend the ends of split pins
back using a long nose pliers (not included).
5. "Snap" a hubcap to the front wheel.
Repeat the above procedure to assemble the other front wheel.
Attach the Front Wheels │ 6
3
3
1
1
2
2
-7-
Front Bottom View
Publicité
Table des Matières
