Publicité
Les langues disponibles
Les langues disponibles
SFL2-LED
INSTRUCTIONS D'INSTALLATION
Standard Yoke Mount:
1.
Attach the yoke mount to the fixture with two M12 bolts provided.
2.
Attach both handles on either side to the fixture and yoke mount
using two M8 bolts provided.
3.
Drill the holes if required on the mounting surface and install the
fixture with necessary hardware.
Note: Hardware not included in package.
4.
Once secured, loosen the adjustment screw to adjust the angle, and
connect the wires according to the wiring diagram.
High-bay Yoke Mount:
1.
Attach the high-bay yoke mount to the fixture with two M12 bolts
provided.
2.
Attach both handles on either side to the fixture and yoke mount
using two M8 bolts provided.
3.
Drill the holes if required on the mounting surface, and install the
fixture with necessary hardware.
Note: Hardware not included in package.
4.
Once secured, loosen the adjustment screw to adjust the angle, and
connect the wires according to the wiring diagram.
ACCESSORIES
•
Laser Pointer: Attach the bracket to the laser pointer using
two screws provided. Then mount the bracket to the fixture
using the third screw provided.
•
Light Shield: Attach the visor to the luminaire with screws
provided.
WIRING
•
Check that the line voltage is correct.
•
Connect fixture GROUND (green) wire to power supply GROUND
(green) wire.
•
Connect fixture WHITE wire to power supply NEUTRAL wire.
•
Connect fixture BLACK wire to power supply LINE wire
•
The fixture includes 0-10V dimming functionality, connect PINK and
PURPLE wires to a 0-10V dimming controller (optional).
RAB Design Lighting inc.
May - 2022
Ø12mm
Page 2 of 4
Publicité
