Pleasant Hearth 30 Palmetto Fire Pit Mode D'emploi page 6

ASSEMBLY INSTRUCTIONS
5. Attach the ash catcher (E) to the fire bowl (D)
by inserting screws (BB) through predrilled holes
in bottom of fire bowl (D) and securing tightly into
the ash catcher (E) with nuts (CC).
Tighten nuts with Wrench (EE).
Hardware Used
BB
M5x10mm Bolt
CC
M5 Nut
EE
Wrench
6. With base assembly sitting upright, set fire
bowl (D) into support ring (F), set wood grate (C)
into fire bowl (D), and top with mesh cover (B).
Please note this step is only for
model # OFW717RC.
7. For use with the cooking grid, place the wood
grate (C) into the fire bowl (D). Place the cooking
grid (K) into the fire bowl (D). Set the mesh cover
(B) over the fire bowl (D).
5
D
x 3
x 3
E
6
7
6
B
C
D
F
B
K
C
D
BB
CC