Honeywell Home RPWL4045A2000 Notice D'installation page 3

Pairing the Adapter and the Doorbell
1. Press and hold the Setting button on the doorbell for three seconds.
2. Press the button on the back of the adapter.
3. Within 12 seconds of pressing the button on the adapter, press the
Music button to select the ring for the doorbell.
4. Within 12 seconds of pressing the button on the adapter, press the Sunlight button to
select a halo light color (if available ) for that doorbell.
5. When the wiring is complete, snap the wireless adapter onto the wall plate.
Maintenance
Your adapter requires no maintenance except to periodically change the battery. If using
the correct battery, its life should be approximately:
• Up to 2 years; replace with CR2032 lithium battery
Low Battery Notification
When the adapter battery is low an LED on the front of the adapter gives 3 short flashes
until batteries are replaced.
Specifications
Operating Temperature
RF Frequency US/Canada
Range (open field)
Sound Level (typical)
RF Power
Battery Type
Battery Life (5 activations/day)
Doorbell Adapter
32°F to 122°F (0ºC to 50ºC)
916.8 MHz
Up to 350 ft. (106 m)
-
<1mW
CR2032 (3V)
Up to 2 years