Product Operation; Use And Maintenance; Using The Freshspa; Cleaning The Freshspa - brondell FreshSpa Manuel Du Propriétaire

PRODUCT OPERATION

Use and Maintenance

Using the FreshSpa:

To clean the bidet nozzle, push the "Nozzle Cleaning"
button and water will wash over the nozzle. Push the
"Off" button to turn off nozzle cleaning.
To engage a front wash, push the "Front Wash" button
To engage a rear wash, push the "Rear Wash" button
• to increase the water pressure, scroll the precision
wheel back towards the (+) icon
• to decrease the water pressure, scroll the precision
wheel forward towards the (-) icon.
• to stop the flow of water, push the "Off" button
Caution: To avoid discomfort or injury, scroll
precision roller wheel to lowest pressure before
initiating a wash.

Cleaning the FreshSpa:

To clean the nozzle, pull down on the nozzle cap and
clean the nozzle spray holes using a toothbrush or
soft cloth and mild detergent (such as dish soap).
When cleaning, be careful not to drop or flush the
nozzle cap. Periodically tighten the nozzle cap so it
doesn't become loose with use and cleaning.
To clean the FreshSpa, use a mild cleaner such as
Simple Green or Windex spray. Do not scrub or use
harsh, abrasive products to clean the FreshSpa, as
they may scratch the product.

Short term non-use:

If the product will not be used for more than a few
weeks, you may consider shutting the water supply
off at the wall for extra precaution.
Nozzle Cleaning
Front Wash
Rear Wash
Precision Wheel
Off
9