Medical Depot drive 12001-4 Directives D'installation page 4

installation instructions
WEIGHT LIMIT 300 LBS
1. Detach seat by first removing toilet seat bolts
2. Place the rail mounting flange on the toilet and
align the holes
3. Place toilet seat and align holes. (Fig 1)
4. Realign bolts and tighten securely.
5. Slide assist rails into Flange Bride
and secure them with built-in snap
buttons. (Fig 2)
6. Set rail to desired width and height using the
built-in snap buttons. Make sure all built-in snap
buttons are secured before use of product.
item 12001KD-1