Publicité
Les langues disponibles
Les langues disponibles
installation
instructions
1.
Detach seat by first removing toilet seat bolts.
2. Place the rail mounting bracket on the toilet
bowl and align the holes. Ensure tube on
bracket is to the rear closest to the tank (Fig. 1).
3. Replace toilet seat and align holes (Fig. 1).
Insert bolts through toilet seat and bracket
using original nuts and secure.
4. Connect angled tubes to side frames using
"C" Clips (Fig. 2).
5. Slide assist rails into bracket and secure them
with built-in snap buttons. (Fig. 3).
6. Set rail to desired width and height using the
built-in snap buttons. Make sure all built-in
snap buttons are secured before use of
product.
WEIGHT CAPACITY: 300 LBS (136 KG)
Rev.2.03.19.14
Item # 12001-4
Publicité
