Mantenimiento De La Boquilla - Moen ET1100 Guide D'installation

MAINTENANCE OF PRODUCT SURFACE AND CERAMICS
*Wipe dust or stains with a soft wet cloth.
*A wet soft brush, cloth or sponge may be used to clean the ceramic area.
*Do not use abrasive cleaning solutions, such as alcohol,
bleach, paint thinner, cresol, benzene, gasoline, etc.
MANTENIMIENTO DE LA SUPERFICIE
DEL PRODUCTO Y DE LA CERÁMICA
*Limpie el polvo o las manchas con un trapo suave y húmedo.
*Se puede usar un cepillo, trapo o esponja suave y
húmeda para limpiar el área de cerámica.
*No utilice productos de limpieza abrasivos, como alcohol,
cloro, diluyente de pintura, cresol, benceno, gasolina, etc.
L'ENTRETIEN DE LA SURFACE ET DE LA PARTIE
EN CÉRAMIQUE DU PRODUIT.
*Essuyer la poussière ou les taches à l'aide d'un chiffon doux mouillé.
*Une brosse douce mouillée, ou un chiffon ou une éponge doux et mouillés
peuvent être utilisés pour nettoyer la partie en céramique.
*Ne pas utiliser de produits de nettoyage abrasifs comme de l'alcool,
un agent de blanchiment, un solvant, du crésol, du benzène,
de l'essence, etc.
Maintenance
Maintenance
Mantenimiento
Mantenimiento
Entretien
Entretien
When powered on and not seated: Press the "Nozzle Clean" button on the remote
controller, and the washer will automatically extend. You may gently hold the steel pipe
with one hand and pull out the front end of the nozzle outward with the other hand.
If there is dirt in the nozzle orifice, please clean it with a toothbrush. After cleaning,
*Caution: Do not handle nozzle with force or it can break.
When the nozzle is clogged, it is recommended to replace it with a new one.
When powered on and not seated: Press the "Nozzle Clean" button on the remote
controller, and the washer will automatically extend. You may gently hold the steel pipe
with one hand and pull out the front end of the nozzle outward with the other hand.
If there is dirt in the nozzle orifice, please clean it with a toothbrush. After cleaning,
*Caution: Do not handle nozzle with force or it can break.
When the nozzle is clogged, it is recommended to replace it with a new one.
When powered on and not seated: Press the "Nozzle Clean" button on the remote
controller, and the washer will automatically extend. You may gently hold the steel pipe
with one hand and pull out the front end of the nozzle outward with the other hand.
If there is dirt in the nozzle orifice, please clean it with a toothbrush. After cleaning,
*Caution: Do not handle nozzle with force or it can break.
When the nozzle is clogged, it is recommended to replace it with a new one.
30
MAINTENANCE OF THE NOZZLE
insert the front end of the nozzle into the steel pipe.

MANTENIMIENTO DE LA BOQUILLA

insert the front end of the nozzle into the steel pipe.
ENTRETIEN DE LA BUSE
insert the front end of the nozzle into the steel pipe.
Nozzle
Boquilla
Buse