4.3
Function
The sensor head smoke alarm ASD can only be operated in conjunction with
the wireless mounting base ASD 10 or ASD 20. The product is equipped with
a solar cell for power supply. If the product is used in dark environments, use
an optional battery (refer to "Technical data"). The sensor head smoke alarm
ASD is battery-operated and has a service life of approximately 10 years. A
low battery condition is indicated by visual and audible signals.
The product detects the formation of smoke gas and fumes and warns by
means of a loud, audible signals (approx. 85 dB).
The state can be checked via an LED:
•
Regular operation: LED flashes every 48 seconds
•
Increased sampling rate: LED flashes every 2 seconds
•
Alarm: LED flashes every 0.5 seconds
The product ASD 10 transmits the following information via EnOcean® wire-
less:
•
State alarm/no alarm (cyclically)
•
State transition (immediately)
•
Ambient temperature (cyclically)
The product ASD 20 transmits the following information via EnOcean® wire-
less:
•
State alarm/no alarm (cyclically)
•
State transition (immediately)
•
Battery state (cyclically)
Each product has a unique ID. If multiple products are used, the recipient can
distinguish them based on this ID.
4.4
Approvals, conformities, certifications
The product complies with:
•
EMC Directive (2014/30/EU)
•
Low Voltage Directive (2014/35/EU)
•
Radio Equipment Directive, RED (2014/53/EU)
•
RoHS Directive (2011/65/EU)
•
Ecodesign Directive (2009/125/EC)
Product description
Wireless smoke alarm ASD 10/ASD 20
EN
9