Beta 1872/L Mode D'emploi page 28

1d - FILTER ELEMENT
• Remove the filter element from the motor support.
• Clean the filter element (b) frequently using a soft bristle brush.
• To clean more thoroughly, use a shower fitting and direct the jet of water from the
inside towards the outside of the filter element.
The filter is extremely delicate when wet. Avoid using direct
jets of water or making manoeuvres that could damage it.
• Before putting the filter element back on, make sure it is completely dry.
• If the filter element is heavily caked or worn, replace the filter element only (b).
2d - DUST-BAG
The bag should not be reused and must be changed.
How to replace the dust bag:
• Remove the plastic flange from the air inlet connector.
• Take out the full bag.
• Close the plastic flange with the cap provided.
28
b
b
NO!