Cleaning And Maintenance - MPM MMK-08 Mode D'emploi

selector dial (3). There is a safety feature which prevents starting the coffee grinder without the
canister lid (6) and/or without the canister (9) in the receptacle (11).
CAUTION! Empty the ground coffee canister before grinding more coffee.
6. When done grinding coffee, unplug the coffee grinder from the mains and remove the ground
coffee from the canister (9) once it is removed from the receptacle (11). Clean the coffee grinder.
The power cord can be kept in the storage recess (14).
7. The coffee grinder can always be stopped by operating the power switch (2).
8. Do not keep the coffee grinder running for more than 72 seconds without interruption. If the
coffee grinder runs for the maximum permitted time, it requires 10 minutes to cool down before
grinding coffee again.
9. Always try to grind a volume of coffee you can consume directly; if left for some time, ground
coffee will quickly lose its aroma. Keep coffee in a dark, cool and dry place, in a sealed container.
10. Test what is the best ground grain size for each coffee variety in practice. The sheer number of
commercially available coffee varieties prevents any definition of exact ground grain sizes.
11. If the querns jam while processing, stop the coffee grinder, select a roughern grain size and start
grinding again.
CAUTION! Do not use the appliance for grinding any oily food products, e.g. nuts. Do not use the
appliance for grinding any hard products, e.g. rice.
12. Clean the coffee grinder after every use. If left inside appliance, the ground coffee can form sticky
lumps and contaminate the next ground batch.

CLEANING AND MAINTENANCE

CAUTION! Unplug the appliance from the mains before cleaning and maintenance. Never
immerse the appliance in water.
1. Clean the housing of the coffee grinder with a soft cloth moistened with clean water. Do not
clean with abrasive products, solvents or other chemicals which might permanently damage the
appliance.
2. Clean the ground coffee canister (9) and the lids (10), (6) with lukewarm water and a mild deter-
gent; next, rinse clean with water and leave to dry completely. Dishwashers are not recommended
for cleaning the appliance parts.
3. Remove the coffee bean canister lid and the upper quern (8). Grasp the quern and gently rotate it
clockwise to release. Lift the quern out of the appliance. Clean the removed upper quern (8) with
the brush (12) included. The lower quern (7) is permanently attached inside the coffee grinder.
Clean it with the brush (12) included. With the querns clean, reinstall the upper quern and secure
it by rotating counter-clockwise. Remove the upper quern only with the selector dial (4) at FINE;
reinstall the upper quern only with the selector dial (4) at COARSE.
4. Clean the coffee bean canister (5) interior with a soft cloth moistened with clean water, once the
upper quern has been removed.
5. Clean the port under the selector dial (3) which admits the ground coffee to the lower canister
with a dry cloth or the brush (12).
6. With all parts clean and dry, reassemble the coffee grinder and keep it in a dry and clean place.
EN
11