Perel E300W-F Mode D'emploi page 5

E300W-F/E300W-G
4.1 Adding a Smart Socket
To add a smart socket, tap the [+]
button.
Make sure your smartphone is connected
to the network. Enter the password.
Switch on the smart socket by holding
the on-off button pressed for at least
3 seconds. The smart socket is in setting
mode when the LED is blinking green.
Tap the [Start] button on your
smartphone. The smart socket will now
connect to your network.
V. 04 – 01/03/2018 5 ©Velleman nv