CALEFFI Gateway PRO Guide page 12

6 - Description of device alarms
GATEWAY / GATEWAY PRO
Value
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
COMFORT CONTROL
Value
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
SENSOR / SENSOR PRO
Value
Bit 0
Bit 1
Bit 2
Bit 3
Bit 4
Bit 5
Bit 6
Bit 7
Bit 8
Bit 9
Bit 10
Bit 11
Bit 12
Bit 13
Bit 14
Bit 15
Notes:
* The activation of this alarm will keep the boiler operating (and therefore 'on') constantly.
We reserve the right to make changes and improvements to our products and the related technical data in this publication, at any time and without prior notice.
The website www.caleffi.com always has the most up-to-date version of the document, which should be used for technical verifications.
Table C- Description of device alarms
Description
EEPROM writing error
Error during RF configuration
No communication with at least one device
Calendar not initialised
Incorrect syncing between time keeper and internal calendar
Communication timeout on OpenTherm
MODBUS-RTU error
FW updating error
Description
Incorrect motor reset
Low battery - Reboot during motor operation
Battery voltage under threshold (battery nearly exhausted)
Ambient temperature probe faulty
Radiator temperature probe faulty
EEPROM error
Radio frequency faulty
No communication with gateway (device indication)
Tamper open
Not used
Not used
Not used
Not used
Not used
Not used
No communication with gateway (gateway indication)
Description
Not used
Low battery (boiler on*)
Battery voltage under threshold (battery nearly exhausted)
Ambient temperature probe faulty
Not used
EEPROM error
Radio frequency faulty
No communication with gateway (device indication)
Not used
Not used
Not used
Not used
Not used
Not used
Not used
No communication with gateway (gateway indication)
®