How To Set Each Indoor Unit - LG PQNUD1S00 Manuel Du Propriétaire Et D'installation

How to set each Indoor Unit

How to set each Indoor Unit
I Using wired remote controller
AUTO SWING OPERATION
Timer Operation unit
On Off
Set no. Time 01 03
Timer Cancel
Program Week Holiday
Program
Set/Clr
Hour Min
Set/Clr
3. Press the "Program" & "Setup/Clr" keys at the same time
for 3 seconds to set up the indoor address.
• The room address on the PDI is listed in the ascending order of indoor number.
Ex) If the indoor addresses are "7C", "7D", "7E" and "7F", the order of the indoor unit on the
PDI are "1", "2", "3" and "4".
• The indoor numbers must be entered in sequence to be accurately recognized in the PDI.
Ex) Correct indoor unit address setup: "01", "02", "03" (setup in order)
Incorrect indoor unit address setup: "01", "02", "06"
18 Electricity Distribution Indicator
All manuals and user guides at all-guides.com
SET TEMP FAN SPEED SUB FUNCTION
Room Temp
HI AUTO Heater Preheat
MED Defrost Humidify
JET
LO Filter Out door
1 2 3 4
Time ZONE
Program set
05 07 09 11 13 15 17 19 21 23
Plasma
RESET
1. Press the "Program" &
"Set/Clr" keys at the same
time.
2. Set up the indoor address
using the temperature
adjustment key
☛ Setup range: 00-7F
3
Group No. Indoor No.
A