Oil Changing - Perel Tools WLS552 Notice D'emploi

• Sharpening the Wedge
Sharpen the wedge (1) using a fine-toothed file. Carefully remove any burrs or flat spots.

• Oil Changing

Recommended oils: L-HM 68, N 68 or equivalent.
Make sure the log pusher (7) has fully retracted and that the log splitter has been disconnected from the mains.
Unscrew the dipstick and remove it together with the seal ring. Position a container (capacity of at least 4 litres)
under the log splitter and tilt the log splitter to empty the oil into the container.
Tilt the log splitter with the drain port upwards. Use a clean funnel and pour the oil carefully into the tank respecting
the quantities.
WLS552
7 PEREL