Functions - Deni 1910 Instructions

Compact Vacuum Sealer
Cancel Button Stops the unit at any time.
Seal Only For sealing a bag without vacuum, so that the vacuum can be formed.
Vacuum/Seal For vacuuming the bag and automatically sealing it when vacuum is complete.
On Indicator Lights Indicates the status of vacuum or seal process.
Unlock Buttons On the right and left side of the cover. Press down to unlock. In the locked position, they secure
the lid in place while the vacuum packing cycle is under way in bags; they release automatically.
Lid Opening the lid into the fixed raised position allows you to position the bags before starting the
vacuum packing process.
Vacuum Chamber Position the open end of the bag inside the chamber, draws air from the bag and collect any
excess liquid.
Sealing Gasket Presses the bag onto the sealing strip.
Airtight Gaskets Guarantee that a vacuum will be maintained in the chamber, thus allowing air to be removed from
bags and containers.
Sealing Strip Place bag to be sealed over this strip.
Sealing Bar Teflon-coated heating element that seals the bag and prevents it from sticking to the bar.
3

FUNCTIONS