Verilux HappyLight Compact Mode D'emploi page 3

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Important Safeguards — continued
• This lamp is for indoor use only.
• Avoid placing this lamp in areas that are exposed to direct sunlight or close to heat-
radiating products such as heaters. Do not place the lamp on the top of appliances that
radiate heat.
• Protect the power cord from being walked on or pinched, particularly at plugs,
convenience receptacles and the point where the power cord exits the lamp.
• Do not operate this lamp if it has been damaged in any way. For example, the power
supply cord or plug has been damaged, liquid has been spilled on or objects have
fallen onto the lamp, the lamp has been exposed to rain or moisture, the lamp does not
operate normally or has been dropped.
• This lamp may cause interference with radios, cordless telephones or devices that use a
wireless remote control, such as televisions. If interference occurs, move the lamp away
from the device, plug the lamp or the device into a different outlet or move the lamp out
of the line of sight of the remote control receiver.
• Top of lamp is secured with strong magnets. Avoid lifting or carrying lamp by the top.
• Avoid placing the lamp in areas that are dusty, humid/moist, lack ventilation or are
subject to constant vibration.
• Do not dismantle other than to replace the bulb. There are no user serviceable parts in
these lamps.
• This lamp is not for use with light dimmers, timers, motion detectors, voltage
transformers or extension cords.
• Do not leave the lamp unattended during use.
• Do NOT use lubricating agent in assembly. Please see troubleshooting section if you are
having difficulty assembling your lamp.
• Use only the type of bulb and maximum wattage indicated by Verilux.
• Never cover the lamp or place anything on top of it when it is in operation.
• Do not use solvents or cleaners containing abrasives, or ammonia-based cleaners on
this product.
• After cleaning the lamp, all moisture should be properly wiped away and dried before
restoring power.
This device complies with Part 18 of the FCC Rules.
This Class B digital apparatus complies with Canadian ICES-005.
VT10_MAN_Rev22-002.indd 3
CAUTION:
SAVE THESE INSTRUCTIONS
Edit#: 002
Title: VT10 Bilingual Manual
Date: 01/11/19
Version: Rev22
3
1/11/19 10:40 AM

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Vt10Vt10ww1

Table des Matières