EAS ELECTRIC EMTD81B Guide D'utilisation page 51

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

MAINTENANCE
Wash air condenser
Leave the dryer to cool down.
Residual water may escape, place an absorbent
cloth under the maintenance cover.
1. Unlock the maintenance cover and open it
completely.
2. Screw both locking levers towards each other.
3. Pull out the air condenser.
4. Clean the air condenser completely, drain
thoroughly.
5. Clean the seals.
6. Re-insert the air condenser, handle at the
bottom!
7. Unscrew both locking levers.
8. Close the maintenance cover until it locks into
position. Please clean the air condenser approx,
once every 3 months if frequently used.
Do not damage the air condenser!
Warning
Clean with water only; do not use hard/sharp-
edged objects!
Do not operate the dryer without the air
condenser!
During drying, water may collect between the
window and the seal, but this does not affect the
function of your dryer!
23
V.2

Publicité

Table des Matières
loading

Table des Matières