Saunum Professional Serie Instructions D'utilisation Et D'installation page 21

4. Carefully lift out the bottom plate with
the heater elements.
WATCH THE HEATER
CABLES CAREFULLY!
40
5. STEP 1 – Remove the ground cable by
first unscrewing the nut. STEP 2 – Carefully
pull the heater ele ment wire straight with
pliers.
DO NOT DAMAGE OR DEFORM THE WIRE
TERMINAL!
6. Remove the cable from the heater ele-
ments.
7. Remove all heater elements by unscrew-
ing the respective nuts.
8. Remove the heating elements and
replace them with new elements.
NOTE! Make sure that the new heating ele-
ment has the same power capacity as the
old one!
... kW
41