Cleaning & Maintenance - Easy Camp Venture Burner Mode D'emploi

CHANGING OR DISCONNECTING GAS CARTRIDGE
• Always disconnect the gas cartridge from the appliance when it is not in use.
• The cartridge can be disconnected or reconnected even if some gas remains.
• Make sure to turn off the appliance completely by turning the tap on the gas valve adaptor (3) counterclockwise to
the symbol "-".
• The gas cartridge shall be changed in a well-ventilated location, preferably outside, away from any sources of ignition,
such as naked flames, pilots, electric fires and away from other people.
• Carefully unscrew the gas cartridge from the valve adaptor (3).
• Check the contents of a cartridge by shaking it to check for the sound of liquid gas.
• Dispose of the cartridge as per instructions printed on the cartridge.
• To ensure a safe connection of a new gas cartridge to your appliance please read the sections 'ASSEMBLY' and
'OPERATION'.
CLEANING & MAINTENANCE
• Visually check the general condition of the appliance and clean it on a regular
basis.
• Ensure the appliance has cooled off completely before cleaning.
• Regularly check the burner to see that it is free from insects and spiders which
may block the gas system.
• If the burner fails to light or its performance decreases, then the gas injector
may be blocked. Unscrew the gas valve adaptor (3) of the burner. Blow through
the hole to clean the injector with compressed air. Reattach the gas valve adap-
tor (3). When the injector has been replaced check for leaks using soapy water.
• The sealing washer should be checked occasionally to ensure that it is in good
condition. If there is any sign of wear and tear the sealing washer must be repla-
ced with a new one. Contact the dealer or Easy Camp Customer Service.
Clean the
injector with
compressed
air