Eskimo Sierra Mode D'emploi page 7

STANDARD SEAT ASSEMBLY
Use Step 6 for Sierra™ shelter.
#15004
6
(A) Assemble #15004 to (27756/27920/27758) assembly
using (4) 2 IN bolts, (4) nuts, and (8) steel washers as
shown in FIGURE 7.
(B) Repeat step 6A for remaining #15004 seat.
#27825
SEE
DETAIL
8
(A) Assemble #27825 and #27927 to #68380 sled base
using (4) ¾ IN bolts, (4) nuts, and (4) steel washers as
shown in FIGURE 9.
(B) Repeat step 8A for remaining #27825 and #27927
components.
Check for parts online at www.GetEskimo.com or call 800-345-6007 M-F 8-5 CDT
ALUMINUM FRAME ASSEMBLY
(25300)
(27756/27920/27758)
ASSEMBLY
7
#68380
#27927
9
Operator's Manual | Flip-Style Sled Shelter
25300 Sierra™
#27727
(A) Assemble (2) #27727 assemblies to (1) #27728 using
the included 1/2 IN sheet metal screws. Use (2) screws per
side at the pre-drilled locations on #27728.
(B) Repeat step 7A for (6) remaining #27727 assemblies
and (3) #27728 poles.
(27825/68380)
ASSEMBLY
SEE
DETAIL
(A) Assemble (27727/27728) assembly and #27821 to
#27825 using (2) 2-1/2 IN Phillips drive bolts, (2) nuts, and
(2) steel washers.
(B) Repeat step 9A for (2) remaining (27727/27728)
assemblies.
|
25250 Sierra™ Thermal
#27728
#27821
(27727/27728)
ASSEMBLY
7