SEFRAM 95 Manuel D'utilisation page 10

INTRODUCTION
The Lan cable tester is a newly designed tool that can
l
easily test the correct pin configuration of the RJ45/RJ11
modular cables, 10/100 base-T cable and Token Ring
cable etc.
By comparing one transmitting end and the corresponding
l
receiving end, the Lan cable tester also can test installed
cable far away by using the remote receiving unit.
The LCT provides the variety for wiring check, such as
l
cable continuity, open status, short status and miss-wired.
FEATURES
Designed for RJ45/RJ11 modular cables, 10/100 base-T
l
cable and Token Ring cable etc.
The Lan cable tester can verify cable continuity, open,
l
short circuit and miss-wired.
The remote receiving unit is available for installed cables
l
far away either on the wall plates or on the patch panels.
Auto and manual scan function.
l
Ground wire test.
l
Lock status function.
l
Buzzer sound warning for wire status.
l
Display: LED indication for wire status.
l
EN61326-1
l
-1-
- 1 -