Blaupunkt BLP1590HE.COMP Manuel D'utilisation page 13

Long press button about 3 seconds until both lights on in the meanwhile.
Long press button for about 5 seconds until the red light on, when the both earbuds were paired,
anyone can be shut down and the other one will turn off automatically.
1. For initial connection, press buttons of both units at the same time for around 3 seconds until
red and blue light flash alternately, the units will enter pairing status automatically. The
earbuds will be paired successfully within 15 seconds. (Red and blue LED will flash
simultaneously on the main unit, while the blue LED flash every 5 seconds on the secondary
unit).
2. Find the name of the unit "BLP1590HE" in the device list of mobile setting, there will be audio
notice of the connection success within 5 seconds, the blue LED will flash every 5 seconds
on both earbuds after connected successfully.
3. For repeat connection, press the buttons of both units simultaneously for 3 seconds, the
earbuds will be powered on and connected automatically, blue LED will flash every 5
seconds.
4. Either unit can be used independently. Press the button for around 5 seconds; connect it in
Bluetooth devise list in mobile setting.
When earbuds turn on and connect phone successfully, and answer the phone.
When answer the phone, only anyone earbud is on working.
When the phone is coming, the earbuds be on call reminder with phone number, short press
button and answer the phone, double click and refuse the phone.
When on an active call, short press and hang up the phone.
When the earbuds is on and connect phone successfully, it can play music.
When on an active music, short press button and stop to play music, again press short and play
music.
Turn ON
Turn OFF
Pairing
Hands free phone call operation
Listen to Music
Charging