Assembly Sequence - MOLINO X BIKE Mode D'emploi

EN
Please follow the instructions in order.
Please wear gloves to protect your hands while
assembling.

ASSEMBLY SEQUENCE

1. Please spread the main bodies A and B together.
2. Please assemble the front and back support frames in or-
der. The front and back support frames can be distinguished.
Install the frame with wheels on the front. Fasten the nuts and
washers on the support frame using a small wrench.
6
Support frame (front)
First, as shown in the picture, please fasten bolts on the front frame by hand
and then use a small wrench to finish.
Support frame (back
As shown in the picture, please fasten bolts on the back frame by hand and
then use a small wrench to finish.
Movable wheels and a front sticker
are attached on the front frame.
Horizontal caps and a back sticker
are attached on the back frame.
EN
7