Switching Modes - Zehnder Deseo Verso Mode D'emploi

Masquer les pouces

Table des Matières

Les langues disponibles

Low Batteries

When the batteries' tension is lower than 2.2 V, the "Battery

symbol will be displayed for 3 seconds every minute in the clock

zone. The user will have to replace the batteries.

Both in case of replacement of the batteries and of disposal of the

remote control, batteries must be removed and disposed of in compliance

with applicable laws, as they are harmful for the environment.

Once the batteries are installed, the LCD display will be showing all symbols

for 1 second.

You can then set the date and time; the date will flash: the user can set the date

using the «+» or «-» keys.

Then press the «Mode» key; the hour will flash; set the time using the «+» or

«-» keys.

Press the «Mode» key once more; the minutes will flash; set the minutes using

the «+» or «-» keys.

Press the «Mode» button again to finish setting the Minutes and enter the

«Comfort» mode.

Setting

minutes

Day

adjustment

Hour setting

Initialized

remote

control

4.3 SWITCHING MODES

Once date/hour/minutes are set, the remote control will switch to "Comfort"

mode.

From the «Comfort» mode, by pressing the "Mode" button, the "Night" mode

will be activated.

Similarly, by pressing the "Mode" button again, the remote control's modes will

switch to: Comfort Mode – Night Mode – Antifreeze Mode – Clock Mode – Pilot-Wire

Mode – Comfort Mode.

Symbol

Mode

Comfort

Antifreeze

Fil-pilot

Chrono

2 hr boost

Window

Stand-by

Comfort and Night Modes – setting of the mode's temperature

Go to "Night" or "Comfort" mode - use "Plus" or "Minus" buttons for temperature

setting: by pressing the "Plus" button once, the temperature will rise by 0.5 degrees, by

pressing the "Minus" button once, the temperature will drop by 0.5 degrees.

Temperature can be adjusted from 7 up to 30 degrees.

40019479

07/2019

Function description