Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
User's guide
Eagletone LED PAR 28 LIVE
4. HOW TO SET UP THE UNIT
4.1 Control panel
Pedal 1 switch "Blackout mode"
Press down to put the unit in blackout.
Pedal 2 switch "Full-On/Sound"
• F ull-on mode. Press once to set the unit full on. Only then can you operate the Pedal 3
or Pedal 4 to change the chase or color.
• S ound-activated mode. Press down twice and the unit will run in Sound-activated
mode.
Pedal 3 switch "Chase select"
When the unit is not in Blackout mode, press this pedal and the unit will run in Auto
mode. You can then select built-in programs by pressing this pedal again.
Pedal 4 switch "Color select"
When the unit is in Full-on mode, press this pedal to change the color.
4
4.2 Main function chart
M EN U
DMX 512 Address Setting
1. P ress the MENU button, then press the UP or DOWN button until
and then press ENTER.
2.
is now displayed. Press the UP or DOWN button to set the address you want to
use, from
to
. Leave this address on the display, and after a few seconds
the address will be saved into memory.
Select Channel
This will let you switch between 6 different DMX channel modes
(2, 3, 4, 6, 7, 14 Channel DMX mode).
1. Press the MENU button, then press the UP button until
ENTER. One of the DMX channel modes, from
2. P ress the UP or DOWN button to choose the DMX mode you want to use and press
ENTER to confirm and exit.
Slave Mode
This will let you set the unit either as a master or a slave in a master/slave configu-
ration.
1. Press the MENU button, then press the UP button until
press ENTER.
to
will be displayed.
User's guide
Eagletone LED PAR 28 LIVE
DMX512 address
Select channel
Slave mode
Sound mode
Auto mode
Speed of Auto mode
Normal
Blackout
Display normal
Inversion
Red dimmer
Green dimmer
Blue dimmer
is displayed,
is displayed, then press
to
, will be displayed.
is displayed, and then
5
Publicité
Table des Matières
