Power smart DB5004 Mode D'emploi page 9

ASSEMBLY INSTRUCTIONS
4. Turn the handle fastener (F) clockwise to secure the
connection between the main handle (B) and main
pole (G).
5. Remove the nut (BB) and bolt (AA) on the telescopic
pole (J) with a screwdriver (CC).
Hardware Used
AA
M6 x 32 Bolt
BB
M6 Nut
CC
Phillips Screwdriver
6. Remove the bolt (AA) inside the right groove (L) of the
main cover (M) with a screwdriver (CC).
NOTE: Determine the left and right sides of the snow
thrower by standing in the normal operating position.
Hardware Used
AA
M6 x 32 Bolt
CC
Phillips Screwdriver
4
G
5
x 1
BB
x 1
x 1
6
CC
x 1
x 1
9
F
B
AA
CC
J
AA
M
L