OXFORD BABY 11811 Instructions De Montage page 12

STEP 2 " MATTRESS SUPPORT HEIGHT ADJUSTMENT "
THIS STEP REQUIRES:
G. Allen key (1 pc)
FIG.3.
- Remove the Allenbolt 9/16"(15 mm) (K) on the Mattress spring.
- Move Mattress spring to the lowest position as shown in FIG.2.
- Attach the Allenbolt 9/16"(15 mm) (K) on the lowest hole of Sideboard.
- Use Bolt (K) to fill in all holes after assembled mattress spring (8). Tighten all bolts with Allen key (D).
- Final position as shown in FIG.3.
95-11811-V-01
These hardware are included in the CRIB.
(K) AllenBolt 9/16"(15 mm) (4 pcs)
FIG.2.
K
G
Lowest
position