Hartan Rock it GTR Instructions page 12

Instructions
Adjust the back rest to incline the seat frame
Tilt the adjustment lever 13 at the rear to bring the seat frame from
the sitting to the lying position in two stages.
Adjusting the footrest
By pressing the two red safety buttons 15 at the same time, the footrest
can be lowered. When lifting it, adjustment of positions is effected
automatically.
WARNING!
Safety harness
Secure your child with the 5-point belt system 14.
Make sure that the shoulder belts D are inserted and the belt fits snu-
gly against your child. You can adjust the length and tautness of the
belts with the belt ends F. You can adjust the width of the shoulder
and lap belts by tilting open the quick-release slider G and pulling on
the belt E.
Opening the belt: Press the two buttons B at the same time and
remove the magnetic closer A. The bottom fixing C can then be remo-
ved easily.
Closing the belt: Hold together the two fixings C and attach the
magnetic closer A; the fastener locks automatically.
Automatic locking of the upper section
Place the seat frame on the chassis so that the two upper fastening
components rest on the locking bolts provided for this purpose. Both
sides of the lock mechanism 16 will automatically close when you press
the seat frame down.
WARNING!
Ensure that the seat frame is securely in
place before use!
To release the lock mechanism, press the safety button to the right
of the release button on the back of the inclining seat frame and then
press the release button until the release is activated.
Grasp the hoop guard with your other hand to remove the seat frame.
10
13
14
D
G
E
A
C
B
F
16
18
18
15