Soundcore Liberty 3 Pro Mode D'emploi page 8

Option 1: Enable "Dual device connection" and connect to the second device in
the Soundcore app.
Option 2: Wear the earbuds, then press and hold the touchpad on both earbuds
for 5 seconds simultaneously. Select "Soundcore Liberty 3 Pro" on the second
device's Bluetooth list to connect.
• Each time you power on your Soundcore earbuds, they will automatically
connect to your last successfully connected device if available within the
Bluetooth range.
• Mono mode: When Bluetooth is connected, you can use either one of the
earbuds on its own by placing the other one into the charging case and closing it.
• When powered on and connected, if either one of the earbuds is out of battery
and powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case,
and the microphone in the other earbud will be activated.
1
L R
5s
2
5s
Soundcore
Liberty 3 Pro
Soundcore
Liberty 3 Pro
EN 06