Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Use the supplied pattern, to mount the device to a wall. Please note, the device weights about
2.5 kgs. Make sure the wall is stable enough to hold the weigth. Ask a qualified person for aide,
when in doubt.
Screws are not supplied. Use screws that have about the depicted dimensions:
•
Fix the pattern paper to the wall in horizontal position.
•
Drill according to the screw point marks on the pattern paper.
•
Fix a wall mount plug into the hole using a hammer, until it is flush with the wall surface
•
Fasten the screws to the wall, so that there is a 4 mm gap between the screw heads and
the wall surface.
•
Hang the unit onto the screws:
20
Wall Mounting
Publicité
Table des Matières
