Introduction; Fcc Compliance Statement - Leviton vizia rf+ Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Leviton's Programmer/Remote, Cat. No. VRCPG, is a multi-
functional device. It uses Z-Wave
programmer, zone or scene controller, remote and timer for
setting up and operating your Vizia RF +
will guide you through the understanding of your VRCPG
functions as a setup controller. Once your network is installed,
your VRCPG may also be used as a wireless controller for
activating events, and controlling your lighting system.
Your VRCPG comes with rechargeable batteries, a programmer/
remote stand, and a power adapter. NOTE: This product is
designed to work with other Z-Wave
any manufacturer. Z-Wave
categories can be added to the system, and will also act as
repeaters if they support this function of repeating the signal
received to other modules in the system. NOTE: Upon initial
installation, you will need to charge your VRCPG for twelve (12)
hours before programming and use.
wARNING:
Leviton only supports the use of the supplied
rechargeable Ni-MH "AA" size batteries.

fCC COMPLIANCE STATEMENT

This equipment has been tested and found to comply with the limits
for a Class B Digital Device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment OFF and
ON, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving Antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/tv technician for help.

INTRODUCTION

TM
nodes of other types and product
®
VRCPG
Programmer/Remote
VRCPG
Stand
technology to act as a
network. This manual
TM
enabled devices from
®
Power
Adapter
1

Publicité

Table des Matières
loading

Produits Connexes pour Leviton vizia rf+

Table des Matières