Abicor Binzel PSB 31 Mode D'emploi page 37

PSB
Fault
Strong electrode burn-out • Pressure drop while cutting due to
Tab. 9 Troubleshooting
10 Disposal
Cause
incorrectly set pressure monitor
• Loose electrode
• Pilot arc struck too long and too
frequently in the air
NOTICE
• Do not dispose of the device with household waste.
• For disposal, observe the local regulations, laws, provisions, standards
and guidelines.
Troubleshooting
• Correct the pressure monitor
setting
• Hand-tighten the electrode
• Shorten/avoid ignitions in the air if
possible
10 Disposal
EN - 19